Outback HBX mode [RE-wrenches]

[Victor Creazzi]

 Christopher,

 Thank you for your discription of HBX, it sounds
exactly how I usually run my SW with a lot of manual
intervention. I am curious about the actual switching
between grid and inverter. Is the switching
syncronized like the SW where the inverter is in phase
with the grid before transfer occurs, or is it simply
a relay transfer. If the later what is the effect to
appliences and is there a noticable flicker?

Make the wind fun!
Victor Creazzi 
Aerofire Windpower

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------