3648 question/jay peltz [RE-wrenches]
Christopher Freitas - OutBack Power
cfreitas at outbackpower.com
Tue Sep 2 19:15:21 PDT 2003
The 0.90 factor was the efficiency of the VFX3648 at full power. Your
right Bob-O (as usual) that estimating the current draw at 44 VDC
instead of 48 VDC is more accurate.
So the actual current (without the safety margin) would be:
3600 WAC / 44 VDC / 0.90 eff = 91 amps DC
The OutBack OBDC-100 breaker is 100% duty rated so the 125% John Wiles
multiplier doesn't have to be applied as long as the cables are able to
handle 125 amps.
So - the bottom line is that the 100 amp breaker is too tight and may
nuisance trip - its okay if the inverters are not expected to be ran
hard but...
You also can just sneak by with #2 AWG cables from the inverter to the
breakers with the 100 amp breakers. The cables to the battery should be
larger however - and usually are since often they feed two or more
breakers. We offer a busbar now that can connect the battery side of up
to four 175/250 amp breakers or up to six of the OBDC100 breakers - see
the OutBack BB (or "Big Bus").
Christopher Freitas
OutBack Power Systems
cfreitas at outbackpower.com
tel 360 435 6030
Christopher Freitas
OutBack Power Systems, Inc.
cfreitas at outbackpower.com www.outbackpower.com
Tel 360 435 6030 Arlington WA USA
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list