Remote Control Ceing Fan [RE-wrenches]

[Dana Orzel]

Rogers-White hot air furnaces [ bad choice ] have a control problem even
though the front lights were on, and it was diagnosed with how the SW
inverter wave form crosses the X axis in its sudo sign wave. Something about
too long a lag at the X axis, as I remember. On a junk no-name generator it
started just fine, even though the load was Huge [ 8 amps at 120VAC for the
fan alone ].



> We have a customer who has a new Casablanca remote control only ceiling
fan.
> They have a SW4024 inverter which won't operate it. They tested the fan at
a
> home with utility power and it worked. They also tested it with a Honda
3500
> watt generator which is wired into their SW4024. Once the "AC2 in" was
good,
> the fan worked. Turn off the generator; inverting resumes; and control of
> the fan was lost although it did continue to rotate but at fewer rpms and
> with a hum not present on grid or generator power.
>
> Have other's had this SW problem with remote controlled fans? Are there
any
> remote controlled ceiling fan models which are known to work with the SW
> series? Any solutions to the present problem which might allow the current
> fan to operate?
>
> Thanks.
>
> Scott
>
> Backwoods Solar Electric Systems www.backwoodssolar.com
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>
>
>
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================