NEW CEC FORMS ON MICROSOFT WORD [RE-wrenches]

Nick Nicholas, APS APS at SBCGLOBAL.NET
Thu Feb 27 13:50:59 PST 2003


As William and I mentioned:
    The CEC forms are now available online at www.comsumerenergycenter.org.
This is the first time that we can download the forms in Word, making them
very easy to complete. Alternative Power Systems
www.alternativepowersystems.com
aps at sbcglobal.net
135 Colfax Ave.
Grass Valley, CA 95945
(530) 274-0588 phone
(530) 274-0589 fax
----- Original Message -----
From: "Bill Roush" <solarguide at everestkc.net>
To: <RE-wrenches at topica.com>
Sent: Thursday, February 27, 2003 8:55 AM
Subject: RE: pole mount 150 watt modules [RE-wrenches]


> I hear that scrap oil drilling pipe is good for some of these
> applications, if available.
>
> Best,
> Bill Roush
> Solar Electric Systems of Kansas City, Inc.
> 13700 W. 108th St.
> Lenexa, KS 66215
> 913-338-1939
> www.solarguide.com
> Subscribe to our email newsletter at;
> http://www.solarguide.com/Projects.htm
>
>
>
>
>
>
> -----Original Message-----
> From: Nick Nicholas, APS [mailto:APS at SBCGLOBAL.NET]
> Sent: Wednesday, February 26, 2003 3:20 PM
> To: RE-wrenches at topica.com
> Subject: Re: pole mount 150 watt modules [RE-wrenches]
>
> I have four scrap pieces of 8" galvanized pipe that are 9' long and in
> Grass
> Valley, CA.  I would love to sell them at a reduced rate.  Some
> potential
> uses would be, low, fixed arrays, protecting gas tanks, or protecting
> power
> lines in parking lots.
> Alternative Power Systems
> www.alternativepowersystems.com
> aps at sbcglobal.net
> 135 Colfax Ave.
> Grass Valley, CA 95945
> (530) 274-0588 phone
> (530) 274-0589 fax
> ----- Original Message -----
> From: "Travis Creswell, Ozark Solar" <ozsolar at ipa.net>
> To: <RE-wrenches at topica.com>
> Sent: Tuesday, February 25, 2003 8:49 AM
> Subject: Re: pole mount 150 watt modules [RE-wrenches]
>
>
> > It does pay to check for used pipe.  I recently bought two used ~18'
> pieces
> > of 8" Sch80 for $3/ft.  New Sch40 8' was running $15/ft and I would
> have
> had
> > to buy an 21' pieces.  Worked out perfect because I needed 8' under
> grade
> > and 10' above.
> >
> > Speaking of array mounting pipes... Is anyone concerned about the long
> term
> > using standard pipe?  I've looked around a little for galvanized stuff
> but
> > all I could find was custom order and big bucks.  It's probably in the
> scrap
> > yard all the time but never when I am looking for it.  I take the time
> and
> > clean the pipe very well and use the "rust" zinc primer type paint
> before
> I
> > set the pipe.  Then, if time allows, I touch up the scratches that
> will be
> > under grade before I pour the concrete.  After I'm done I come along
> with
> a
> > high quality oil base paint and paint the pole.
> >
> > Travis Creswell
> > Ozark Energy Services
> > ----- Original Message -----
> > From: "Tom Simko" <tom at skylinesolar.com>
> > To: <RE-wrenches at topica.com>
> > Sent: Tuesday, February 25, 2003 9:12 AM
> > Subject: Re: pole mount 150 watt modules [RE-wrenches]
> >
> >
> > >   Basic welding and pipefitting skills could have saved some bucks,
> 2
> > > lengths of pipe would have done the whole project, with just 6' of
> > "scrap".
> > > The savings in pipe would have more then paid for hiring a guy with
> the
> > > needed skills. Strength on a properly welded pipe joint is not an
> issue.
> > > Also, when working with larger O.D. pipe check at any local steel
> > scrapyards
> > > for huge savings over buying new. My own pole mount is 24" O.D. 40'
> wide
> > and
> > > 20' high, and the steel cost 50 bucks at a scrap yard.
> > >
> > > Tom Simko
> > > Skyline Solar
> > >
> > > on 2/24/03 12:19 PM, Nick Nicholas, APS at APS at SBCGLOBAL.NET wrote:
> > >
> > > > Hi Keith:
> > > > We installed four 8" poles last month, and will install the arrays
> as
> > > > part of an SEA workshop in a few weeks.  We used a torch to cut
> the
> pipe
> > to
> > > > 12', so each pole was not excessively heavy.  It did take 3 guys
> and a
> > winch
> > > > to erect the poles.  By the way, I have four 9' scrap pieces of
> the 8"
> > steel
> > > > pipes.
> > > > Alternative Power Systems
> > > > www.alternativepowersystems.com
> > > > aps at sbcglobal.net
> > > > 135 Colfax Ave.
> > > > Grass Valley, CA 95945
> > > > (530) 274-0588 phone
> > > > (530) 274-0589 fax
> > > > ----- Original Message -----
> > > > From: "Jay Peltz, Peltz Power" <jay at asis.com>
> > > > To: <RE-wrenches at topica.com>
> > > > Sent: Thursday, February 20, 2003 7:07 AM
> > > > Subject: Re: pole mount 150 watt modules [RE-wrenches]
> > > >
> > > >
> > > >> HI Keith,
> > > >>
> > > >> I just installed a 8 panel shell 150's.  6" pole.  You'd better
> have
> a
> > > > bunch
> > > >> of strong guys to move that 8" pole.
> > > >>
> > > >> jay
> > > >>
> > > >> peltz power
> > > >>
> > > >> - - - -
> > > >> To send a message: RE-wrenches at topica.com
> > > >>
> > > >> Archive of previous messages:
> http://www.topica.com/lists/RE-wrenches/
> > > >>
> > > >> List rules & etiquette:
> http://www.mrsharkey.com/wrenches/etiquete.htm
> > > >>
> > > >> Check out participant bios: www.mrsharkey.com/wrenches/index.html
> > > >>
> > > >> Hosted by Home Power magazine
> > > >>
> > > >> Moderator: michael.welch at homepower.com
> > > >>
> > > >
> > > > - - - -
> > > > To send a message: RE-wrenches at topica.com
> > > >
> > > > Archive of previous messages:
> http://www.topica.com/lists/RE-wrenches/
> > > >
> > > > List rules & etiquette:
> http://www.mrsharkey.com/wrenches/etiquete.htm
> > > >
> > > > Check out participant bios: www.mrsharkey.com/wrenches/index.html
> > > >
> > > > Hosted by Home Power magazine
> > > >
> > > > Moderator: michael.welch at homepower.com
> > > >
> > > >
> > >
> > > - - - -
> > > To send a message: RE-wrenches at topica.com
> > >
> > > Archive of previous messages:
> http://www.topica.com/lists/RE-wrenches/
> > >
> > > List rules & etiquette:
> http://www.mrsharkey.com/wrenches/etiquete.htm
> > >
> > > Check out participant bios: www.mrsharkey.com/wrenches/index.html
> > >
> > > Hosted by Home Power magazine
> > >
> > > Moderator: michael.welch at homepower.com
> > >
> > >
> > >
> >
> > - - - -
> > To send a message: RE-wrenches at topica.com
> >
> > Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
> >
> > List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
> >
> > Check out participant bios: www.mrsharkey.com/wrenches/index.html
> >
> > Hosted by Home Power magazine
> >
> > Moderator: michael.welch at homepower.com
> >
> >
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================




More information about the RE-wrenches mailing list