pole mount 150 watt modules [RE-wrenches]
Tom Simko
tom at skylinesolar.com
Tue Feb 25 09:12:27 PST 2003
Before I get any responses let me correct my math! 3 lengths of pipe,
with 15' left over, could have done the job. Make friends with a local iron
worker and he can make a buck while saving you money.
Tom Simko
Skyline Solar
on 2/25/03 8:12 AM, Tom Simko at tom at skylinesolar.com wrote:
> Basic welding and pipefitting skills could have saved some bucks, 2
> lengths of pipe would have done the whole project, with just 6' of "scrap".
> The savings in pipe would have more then paid for hiring a guy with the
> needed skills. Strength on a properly welded pipe joint is not an issue.
> Also, when working with larger O.D. pipe check at any local steel scrapyards
> for huge savings over buying new. My own pole mount is 24" O.D. 40' wide and
> 20' high, and the steel cost 50 bucks at a scrap yard.
>
> Tom Simko
> Skyline Solar
>
> on 2/24/03 12:19 PM, Nick Nicholas, APS at APS at SBCGLOBAL.NET wrote:
>
>> Hi Keith:
>> We installed four 8" poles last month, and will install the arrays as
>> part of an SEA workshop in a few weeks. We used a torch to cut the pipe to
>> 12', so each pole was not excessively heavy. It did take 3 guys and a winch
>> to erect the poles. By the way, I have four 9' scrap pieces of the 8" steel
>> pipes.
>> Alternative Power Systems
>> www.alternativepowersystems.com
>> aps at sbcglobal.net
>> 135 Colfax Ave.
>> Grass Valley, CA 95945
>> (530) 274-0588 phone
>> (530) 274-0589 fax
>> ----- Original Message -----
>> From: "Jay Peltz, Peltz Power" <jay at asis.com>
>> To: <RE-wrenches at topica.com>
>> Sent: Thursday, February 20, 2003 7:07 AM
>> Subject: Re: pole mount 150 watt modules [RE-wrenches]
>>
>>
>>> HI Keith,
>>>
>>> I just installed a 8 panel shell 150's. 6" pole. You'd better have a
>> bunch
>>> of strong guys to move that 8" pole.
>>>
>>> jay
>>>
>>> peltz power
>>>
>>> - - - -
>>> To send a message: RE-wrenches at topica.com
>>>
>>> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>>>
>>> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>>>
>>> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>>>
>>> Hosted by Home Power magazine
>>>
>>> Moderator: michael.welch at homepower.com
>>>
>>
>> - - - -
>> To send a message: RE-wrenches at topica.com
>>
>> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>>
>> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>>
>> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>>
>> Hosted by Home Power magazine
>>
>> Moderator: michael.welch at homepower.com
>>
>>
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
More information about the RE-wrenches
mailing list