Whisper woes [RE-wrenches]
Matt Tritt
solarone at charter.net
Sun Nov 16 20:49:05 PST 2003
Hi guise,
Could it be that the Whisper furled suddenly and violently, enough so to
actually put a kink in the tail boom? I've seen this happen to old
Aermotors, really old ones that have seized-up and been caught in a hard
cross wind.
I prefer the scenario of the sticking furling hinge. ;-)
Matt T
----- Original Message -----
From: "Jeff Clearwater, Village Power Design" <clrwater at earthlink.net>
To: <RE-wrenches at topica.com>
Sent: Sunday, November 16, 2003 8:43 PM
Subject: Re: Whisper woes [RE-wrenches]
> Hi John,
>
> Sounds like it may be just stuck in it's furled position (machine
> head tilts back and tail goes to right angles with shaft). They are
> prone to sticking up. Either the shock absorber is sticky or the
> furling pivot is worn. As you may know their were a number of
> recalls for Whispers produced in the late 90s. As I remember, one
> had to do with the shims and spacers on the furling pivot. You might
> want to get the list of the 4 or 5 recall items from SW Wind before
> you go out.
>
> Hope that helps!
>
> Jeff C.
>
>
> >Hi,
> > I just received this email from a customer too far away to make the
trip
> >without having an idea what I'm getting into. Here is his email:
> >
> >" My wind generator has broken. The tail is not straight behind the
> >generator. It is 'L' shaped. What do you think has happened? It
> >is cock-eyed and
> >not working. Has a pin sheared or something? Are you interested in
> >helping me
> >fix it? Are you busy? Please advise.
> >Thanks, Brian
> >
> >This is a customer installed Whisper. I think it is an H40 or H80. I
hooked
> >up the wires but was not involved in installing the tower or turbine. He
put
> >it on a home made 25' tower not even clearing the ridgeline of his house
30'
> >away. It has produced very little power and I would't expect it would be
> >hammered by high winds though the wind it would get would probably
> >be turbulent.
> >Anyone hazard to guess what broke?
> >
> >John Blittersdorf
> >Central VT Solar & Wind
> >
> >
> >
> >--
> >[Non-text portions of this message have been removed]
> >
> >- - - -
> >To send a message: RE-wrenches at topica.com
> >
> >Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
> >
> >List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
> >
> >Check out participant bios: www.mrsharkey.com/wrenches/index.html
> >
> >Hosted by Home Power magazine
> >
> >Moderator: michael.welch at homepower.com
>
>
> --
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Jeff Clearwater
> Village Power Design Associates
> http://www.villagepower.com
> Sustainable Energy & Water Solutions for Home & Village
>
> Office: (413) 256-6777, Cell: (720)480-8455
> Fax: (413) 825-0372
> 61 Baker Road
> Shutesbury, MA 01072;
> PO Box 115
> Boonville, CA 95415
> (707) 895-9015
> Fax: (707) 897-0224
>
> Council Member - Ecovillage Network of the Americas -
http://www.ecovillage.org
> Advisory Board - Living Routes - Ecovillage Education -
> http://www.livingroutes.org
> Founder: Ecovillage Research, Development, and Demonstration Program:
> http://www.home.earthlink.net/~clrwater/RDD/rdd.html
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list