Conduit inside the tracker pole [RE-wrenches]

[Ken Hulet, Engineering Services Co.]

<x-flowed>
I have a customer that:

A. Owns a machine shop

B. has big sign design experience

C. Wants to fabricate a flange mount for his tracker pole

D. Wants to run the conduit inside the tracker pole

Questions and details:

We thought we could stop the conduit a foot or so of where the combiner 
box will be mounted and cut a hole and add a bushing to get inside the 
pole. Basically the bend of wire from the bushing to the upright 
conduit would NOT be in conduit.

Can you see problems or code issues with this?

Thanks,
Ken
________________________________
If WE don't make a better world... Who will? Government?  Corporations? 
  Someone else?

Ken Hulet
Engineering Services Co.
Blanchardville, WI
608.523.3726
http://www.revolutionearth.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================


</x-flowed>