Water Miser Caps venting water [RE-wrenches]

[Gary Higbee]

Wrenches,

Is it normal for Water Miser caps (or Hydro Caps) to vent water out of the
top? I've seen water pooling on top of my client's batteries, and we're both
wondering if this is normal (my client thinks not, and believes the caps may
have gone bad). You may be wondering what the bulk and float voltages are.
My client's nominal 24-volt IGB's run around 29.2 and 26.4 volts
respectively.

I don't have experience with these caps, and only know that my own ancient
T-105's (no caps) do frequently have water on the top. I wipe 'em off and
fill 'em up now and then.

Thanks,

Gary

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      Gary Higbee  (gary at windstreamsolar.com)
                     (541 )607-1818 (Eugene)
                        (541) 954-3881 (Cell)
Solar, wind, and hydro site analysis and system design
    Components dealer and installation assistance
 ~ WindStream Solar (www.windstreamsolar.com) ~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================