SW4048 remote start query [RE-wrenches]
Jay Peltz, Peltz Power
jay at asis.com
Fri Feb 28 19:07:03 PST 2003
HI Eric,
I would start with improving the generator.
1. check the oil viscosity. Maybe go with synthetic.
2. Is there moisture problems in the propane?
If all else fails, then start the genny on a schedule that would allow you
to start the heater before hand.
good luck,
jay
peltz power
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
More information about the RE-wrenches
mailing list