CA wrenches: CEC forms are completed [RE-wrenches]

Nick Nicholas, APS APS at SBCGLOBAL.NET
Wed Feb 26 13:13:21 PST 2003


I doubt that I 'm the only one who cares about this.
The CEC forms can be downloaded at:
http://www.energy.ca.gov/renewables/documents/index.html
The inverter efficiencies are also posted.

Nick
Alternative Power Systems
www.alternativepowersystems.com
aps at sbcglobal.net
135 Colfax Ave.
Grass Valley, CA 95945
(530) 274-0588 phone
(530) 274-0589 fax
----- Original Message -----
From: "Tom Simko" <tom at skylinesolar.com>
To: <RE-wrenches at topica.com>
Sent: Tuesday, February 25, 2003 2:46 PM
Subject: Re: pole mount 150 watt modules [RE-wrenches]


> William,
>  I trust my welds absolutely,  welded pipe joints properly done do not
raise
> any liability fears with me.  If in doubt of the welders skill, of course
go
> with single lengths of pipe. I just wanted to point out that hiring out
the
> welding work if required would save pipe and money for all concerned.
>
> Tom Simko
> Skyline Solar
>
>
> on 2/25/03 9:08 AM, William Miller at wrmiller at slonet.org wrote:
>
> > At 08:12 AM 2/25/2003 -0700, you wrote:
> >> Strength on a properly welded pipe joint is not an issue.20' high, and
> > the steel cost 50 bucks at a scrap yard.
> >>
> >> Tom Simko
> >> Skyline Solar
> >>
> >
> > Tom:
> >
> > We've faced the same decision a number of times:  to weld or not to
weld.
> > The question is:  Are you willing to accept the very expensive liability
if
> > the weld fails?
> >
> > William Miller
> >
> > PS:  Our answer:  Not if there is any way in hell to avoid that!  Pipe
is
> > cheap, compared to lawsuits.
> >
> > WM
> >
> > __________________________________________________________________
> > William Miller
> > Miller Power and Communications
> > PO Box 50, Santa Margarita, CA 93453
> > Voice :805-438-5600     Fax: 805-438-4607
> > email: wrmiller at slonet.org
> > http://millerpowerandcomm.com
> > License No. C-10-773985
> > _____________________________________________________________
> > Compatibility:
> > Word processor: WP10
> > Spreadsheet: Quatro Pro 10
> > CAD: Microstation 95, DXF, Visio 4.1T
> > _____________________________________________________________
> > "Every decent man is ashamed of the government he lives under."
> > H. L. Mencken
> > __________________________________________________________________
> >
> > - - - -
> > To send a message: RE-wrenches at topica.com
> >
> > Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
> >
> > List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
> >
> > Check out participant bios: www.mrsharkey.com/wrenches/index.html
> >
> > Hosted by Home Power magazine
> >
> > Moderator: michael.welch at homepower.com
> >
> >
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================




More information about the RE-wrenches mailing list