MC connectors, warranties and PV system life [RE-wrenches]
Eric Smiley
Eric_Smiley at bcit.ca
Mon Feb 3 09:34:24 PST 2003
>I have an idea that perhaps will reach fruition in the years to come- a
>twist lock style connector that will have a tab that lines up when it
is
>"twisted and locked" in place.
I thought both NEC 690.33(c) and CEC 50-016(d)required the connectors to
be a latching or locking type. Following this list, I understood that
some installers were heat shrinking the MC connectors. Aside from better
weather resistance, was this to meet the intent of 690.33(c)?
I was also told by an inspector that wire marked only TC must be
supported by a cable tray or raceway - at least in Canada. Is there an
exception in the NEC?
Eric Smiley
Project Leader
Photovoltaic Energy Applied Research, Technology Centre
British Columbia Institute of Technology
Burnaby Campus
NE25 - 3700 Willingdon Avenue
Burnaby, British Columbia
Canada V5G 3H2
phone: 604.432.8657 fax: 604.436.0286
esmiley at bcit.ca www.tc.bcit.ca
The information contained in this E-mail is intended for the addressee
only. If you have received this in error please delete it.
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
More information about the RE-wrenches
mailing list