SW4024 and Pizzo Ignitors [RE-wrenches]
Jack West, Talkeetna AE
jackwest at alaska.net
Sun Jan 5 00:38:59 PST 2003
William et al,
The ability of the 4024 to shed the charger load is approximately 1 amp
per cycle (16ms). IE, at 30 amps charging it takes 1/2 second to
completely shed the charger. Pretty slow. I have seen this cause
problems several times with pumps coming on. Generally setting the max
charge amps to a lower value will fix the nuisance problems. I did not
personnally measure this value but rather got the number from tech
support at trace when I was having similar trouble with a customer's
system.
Jack West
William wrote:
> I've never tested either feature. Has anyone out there tested either or
> both of these features?
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
More information about the RE-wrenches
mailing list