SW4024 and Pizzo Ignitors [RE-wrenches]
Jay Peltz, Peltz Power
jay at asis.com
Sun Jan 5 09:11:26 PST 2003
Hi All,
What I'm curious about is that "glow bars" only use a few hundred watts max.
I don't understand all this talk of overloading a 3500 watt genny?
I think the problem is not in acutal power useage but in some other problem
such as wave form. I've got a customer ( haven't been back out to the site
yet) who says their microwaves work fine on the inverter, but don't work
with the genny ( SW4024) which is a 4.5kw onan in good shape.
Remember its not the size, its how it works!!
jay
Peltz Power
----- Original Message -----
From: "Jack West, Talkeetna AE" <jackwest at alaska.net>
To: <RE-wrenches at topica.com>
Sent: Sunday, January 05, 2003 12:38 AM
Subject: Re: SW4024 and Pizzo Ignitors [RE-wrenches]
> William et al,
>
> The ability of the 4024 to shed the charger load is approximately 1 amp
> per cycle (16ms). IE, at 30 amps charging it takes 1/2 second to
> completely shed the charger. Pretty slow. I have seen this cause
> problems several times with pumps coming on. Generally setting the max
> charge amps to a lower value will fix the nuisance problems. I did not
> personnally measure this value but rather got the number from tech
> support at trace when I was having similar trouble with a customer's
> system.
>
> Jack West
>
> William wrote:
>
> > I've never tested either feature. Has anyone out there tested either or
> > both of these features?
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>
>
>
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
More information about the RE-wrenches
mailing list