SW4024 and Pizzo Ignitors [RE-wrenches]

[Todd Cory, Mt. Shasta Energy Services]

I have seen this problem with large surge loads that the inverter cannot respond
quick enough to, and so it often momentarily overloads the genny, which throws
it's voltage/ frequency out of the acceptability window, this causes the SW to
drop the genny input entirely and then it reconnects after a time-out period.

Even with AC2 dialed way down it still occurs.

Todd



William Miller wrote:

>  Has anyone out there tested either or
> both of these features?  Or is anyone going to visit an SW inverter with a
> generator in the near future that could test these features?  I imagine it
> would be done by setting AC2 INPUT AMPS temporarily to an artificially low
> level, turn on some loads and record how the system performs.
>
> William Miller

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================