Peerless [RE-wrenches]

[larry]

I have had a Peerless for over 10 years that no matter what power source I
use the top burners will sit and spark anytime the oven door is opened and
the flame starts or any time I increase the temperature while baking. All
the electronics have been replaced twice and this condition still persists.
Perhaps your problem has nothing to do with inverter power.
Just a thought.

Larry Elliott



Here's an unusual one. I have a client with a Heart Interface Freedom
25 in an off-grid system. They bought a Peerless Premier stove with
pilot-less ignition based on my recommendations, as the stove is not a
phantom load and the oven does not use a glow-bar.

The weird thing is when the inverter is idle and they turn on some other
load in the house (like the frig turns on or they run the vacuum), the
igniters on the stove top start sparking even though the stove is not in
use. When the inverter is out of search mode the igniters are fine
regardless of what loads come on/off. The client has even tried running
the stove with an extension cord plugged directly into the inverter and

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: re-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------