balancing from 120 to 240 [RE-wrenches]

[Darryl Thayer]

Hello to all
Does anyone know can I use a Xantrex or Outback x240
transformer to balance power from an SMA on to a load
on a service panel?  

My customer in the north woods is concerned with very
poor power quality and would like to have the SMA put
power on both sides of his service.  

Speaking of poor power quaility will I have trouble
with utility voltage sag and the SMA? 

As a note, last summer I had problems with a
Solar-UPS-grid-tie  Where the voltage sag caused the
SW to drop the line and take over load, so many times
that the system up set the homeowner.  Any comments is
this voltage sage problem occur for other people? help
on this also. 

Daryl

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: re-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------