SW4048 voltage swing [RE-wrenches]

[Ray Walters]

At 06:38 PM 9/21/02 -1000, you wrote:
>I have a SW4048 and noticed recently lighting on the inverter circuit
>was "doing the jitter bug".  I lost the cube transformer to my
>phone/answering machine.  I suspected a voltage surge.  I checked with
>my fluke 87 and found the voltage as high as 165 volts on the output and
>wildly fluctuating between 140- 165 volts.  I immediately flipped the
>SQD to the utility side till I receive some information about the
>troubleshooting protocol.
> 
>Any suggestions from anyone as to the culprit..??
> 
> 
> 
>Keith Cronin
>Island Energy Solutions
>318 A Kuulei Road
>Kailua, Hawaii 96734
>808-262-3268 Tel
>808-263-0338 Fax
> 
 

Sounds like lightning damage, send it in.

Ray

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================