Wattsun AZ-300 [RE-wrenches]

[William Miller]

At 09:44 AM 9/18/02 -0700, you wrote:
>William & Jeff,
>
>Array Technologies is now replacing the original crappy little motors with
>New and Improved little motors which, they claim, is a permanent fix. I have
>had similar problems but have kept at it regardless of how many trips it
>takes or how irritating it might be. Anyone who has ever been involved in
>manufacturing can tell you (that includes me) that everyone in the supply
>chain is at the mercy of the supplier of even the most obscure component in
>whatever it is you build. If Wattsun gets a part they believe to be good,
>but isn't, they get trashed for building a bad product, which they don't.

I use a lot of electrical and electronic equipment in my dual careers, and
I am not aware of any other manufacturers asking to be excused from quality
control because they got screwed by a supplier.

>
>I stopped selling Zomeworks years ago (3 actually) because of their poor
>quality control, slow morning return and wind-related poor performance
>factors (not to mention their weight). I hear that they have the bugs worked
>out now, which they should, after all the years of problems they had!
>Compared to the incredibly slow response of Zomeworks to their problems,
>Wattsun is a poster child of responsiveness!.

We don't like slow morning wake up, but we sure prefer it to stuck in one
position.

William


__________________________________________________________________
William Miller
Miller Power and Communications
PO Box 50, Santa Margarita, CA 93453
Voice :805-438-5600		Fax: 805-438-4607	VMail: 805-546-4875
email: wrmiller at slonet.org
http://millerpowerandcomm.com
License No. C-10-773985
_____________________________________________________________
Compatibility:
Word processor: WP7
Spreadsheet: Quatro Pro 7
CAD: Microstation 95, DXF, Visio 4.1T
_____________________________________________________________
"Every decent man is ashamed of the government he lives under."
                                    H. L. Mencken
__________________________________________________________________

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================