generator question [RE-wrenches]

[Todd Cory, Mt. Shasta Energy Services]

Thanks to everyone for their feedback on generators. I consider myself to be
much better informed on this subject now and can pass this onto the customer so
they can make a informed decision.

This list is just invaluable! Thanks to Michael Welch for moderating and HP for
providing the service.

Todd


Jeff Yago wrote:

> Yes the Kohler 6.5RMY was taken out of production because the engine could
> not meet the new emission requirements.  Kohler decided to no longer make
> the smaller unit, but we found a dealer that still had several in stock so
> we have purchased one recently.
>
> As to the question of the circuit breaker, the dealer just removes the
> double pole breaker and installs a single pole 70 amp breaker on the 8.5 kW
> unit.  The re-wiring only takes a few minutes.  Kohler may offer this as a
> part number, but my dealer does it all with off the shelf electrical parts.
> If you are using a single Trace SW40, this is all the generator you will
> need as it has a 60 amp @120 volt input and transfer limit.
>
> Jeff Yago
> Dunimis Technology Inc.

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================