Switches [RE-wrenches]

Joel Davidson joeldavidson at earthlink.net
Sat May 11 21:17:28 PDT 2002


Rob, Please send the list. A while back someone sent the old list but I
misplaced it. Thank you. - Joel Davidson

Rob Harlan wrote:

> At a recent meeting with PG&E (May 7th in San Ramon) they handed out an
> expanded list of acceptable lockable disconnects.  The list includes both
> fused and nonfused disconnects.  They also reinterated that the switch must
> have an external lever and that it is their policy not to lock them.
>
> Rob Harlan
> Mendocino Solar Service
> mendosol.mcn.org
>
> ----- Original Message -----
> From: "William Miller" <wrmiller at slonet.org>
> To: <RE-wrenches at topica.com>
> Sent: Thursday, May 09, 2002 10:29 AM
> Subject: RE: Switches [RE-wrenches]
>
> > At 08:41 AM 5/9/02 -0700, you wrote:
> > >I guess every PG&E region is different. Around here they were adamant
> > about wanting to put their lock on the unit in the ON position.
> > >
> >
> >
> > Here's further clarification.  This is cut directly from PG&E's e-net web
> > page:
> >
> > Approved Disconnect Switches. Effective July 1, 2001, your disconnect
> > switch must be a
> >                                   blade-type switch ("knife switch"). In
> > keeping with the technical requirements of Rule 21, the
> >                                   pull-out switches commonly used in
> > air-conditioning units and spas are not acceptable and will
> >                                   not be approved. In addition, the
> > customer is solely responsible for the maintenance of all fuses
> >                                   in fused blade-type disconnect switches.
> >
> >
> >
> > William
> >
> > __________________________________________________________________
> > William Miller
> > Miller Power and Communications
> > PO Box 50, Santa Margarita, CA 93453
> > Voice :805-438-5600 Fax: 805-438-4607 VMail: 805-546-4875
> > email: wrmiller at slonet.org
> > http://millerpowerandcomm.com
> > License No. C-10-773985
> > _____________________________________________________________
> > Compatibility:
> > Word processor: WP7
> > Spreadsheet: Quatro Pro 7
> > CAD: Microstation 95, DXF, Visio 4.1T
> > _____________________________________________________________
> > "Every decent man is ashamed of the government he lives under."
> >                                     H. L. Mencken
> > __________________________________________________________________
> >
> > - - - -
> > To send a message: RE-wrenches at topica.com
> >
> > Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
> >
> > List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
> >
> > Check out participant bios: www.mrsharkey.com/wrenches/index.html
> >
> > Hosted by Home Power magazine
> >
> > Moderator: michael.welch at homepower.com
> >
> >
> >
> >
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================





More information about the RE-wrenches mailing list