SW compatibility [RE-wrenches]
William Miller
wrmiller at slonet.org
Thu Oct 24 20:24:21 PDT 2002
Friends:
Actually, the newer inverter IS GTI enabled. When they were both running
together, there didn't seem to be a problem with synchronization.
Does a GTI enabled inverter have to have a GTI?
Thanks again,
William
>Date: Thu, 24 Oct 2002 18:41:45 -0700
>To: Wrenches
>From: William Miller <wrmiller at slonet.org>
>Subject: SW compatibility
>
>Pals:
>
>I have a client who has two SW inverters. One is a new SW, probably type
2 and the other is an older, factory rebuilt Type 1. The older one has
been at a repair depot twice for a fan that runs and won't stop. While it
has been gone, the new one has had some firmware problems, generally having
to do with generator charging, resolved by a reset. The new service
manager, by the name of Steve Higgins, says the two SWs are not compatible,
i.e. not stackable. Does anyone have experience with this?
>
>Thanks,
>
>
>William Miller
>
>
>
__________________________________________________________________
William Miller
Miller Power and Communications
PO Box 50, Santa Margarita, CA 93453
Voice :805-438-5600 Fax: 805-438-4607 VMail: 805-546-4875
email: wrmiller at slonet.org
http://millerpowerandcomm.com
License No. C-10-773985
_____________________________________________________________
Compatibility:
Word processor: WP7
Spreadsheet: Quatro Pro 7
CAD: Microstation 95, DXF, Visio 4.1T
_____________________________________________________________
"Every decent man is ashamed of the government he lives under."
H. L. Mencken
__________________________________________________________________
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
More information about the RE-wrenches
mailing list