SQ pumps on mod sine wave [RE-wrenches]

[Allan Sindelar]

Kirk,
Those were all the Great Ideas I came up with. Allan

----- Original Message -----
From: "Kirk Herander" <kirk at vtsolar.com>
> More info: I specified the pump and the well driller installed it and set
up
> the tank. Originally this problem would happen once every few days, and I
> discovered that the tank precharge was set incorrectly - actually set too
> high, so I adjusted it to 28 psi (cut-in 30 psi) and it seemed to help.
The
> pressure switch is not a low-pressure cut-off type (no lever to manually
> reset).
> Kirk

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================