DC-GFP/2 protection [RE-wrenches]
Electrical Energy
solar at eagle-access.net
Wed Aug 21 16:17:46 PDT 2002
<x-flowed>
Hello Wrenches,
The instructions for the Outback DC - GFP/2 (ground fault protection
device) require circuit breakers on either side of the unit. There is a
breaker to disconnect the array from the GFP/2, and another to isolate the
charge controller from the batteries.
I have heard that the DC - GFP/2 is a 60 A breaker besides being ground
fault protection. Is there any Code, Listing or technical reason why we
can't use the GFP/2 for the array disconnect switch, eliminating one breaker?
Thanks,
Drake
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
</x-flowed>
More information about the RE-wrenches
mailing list