GFI isolated neutral [RE-wrenches]

[Bob Maynard, Energy Outfitters]

Bill,
We started using the Outback products a few weeks ago.  Awesome!  They will
definately impact the way systems go together with their dc and ac boxes.  Say
good bye to DC250's!
Bob Maynard

Bill Hoffer wrote:

> Outback Power has a fine isolation block that fits on a standard Ilsco
> isolation block, it is similar to Xantrex's new block and the isolation
> block used in Power Centers.  These blocks can be used in tandem for an
> isolated nuetral or added to the sides of the standard 500 amp shunt used in
> the DC250, Power Module, or Power Center to add additional wire connection
> points to the shunt.  I think that the Outback Power module is the best one
> I have used.  You should be able to drive a self tapping sheet metal screw
> into an already mounted DC250 (with a small pilot hole) to mount the block.
>
> By the way Outback Power is the one to keep an eye on, all the engineering
> talent from Trace has moved over there, and they now have a version of the
> Power Panel on steriods that includes a battery box.  It is designed to
> accomadate any inverter (they will modify mounting plates upon request!).
> They are working on a new charger and inverter, that I cannot wait to see.
> Check them out at outbackpower.com
>
> Bill Hoffer
> Sunergy Engineering
> billhoffer at hotmail.com
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================