Water pumping on grid tie [RE-wrenches]
Joel Davidson
joeldavidson at earthlink.net
Thu Aug 16 08:23:46 PDT 2001
Bleeding edge is too dot-com wannabe more than a cubicle dweller. I'd rather be
a future shock wave rider.
Phil Undercuffler wrote:
> Correct me if I'm wrong, but my understanding is that if you have
> time-of-use metering then you also have time-of-use NET metering! If the
> pumps run all night then you are buying power at the low rate and selling
> back PV power all afternoon at the high rate--sounds like an easy sell to
> me.
>
> Also, to Baran re "What good is cutting edge when all it does is bite you?"
> an old friend in the computer biz once admonished me to always be aware of
> the difference between the leading edge and the bleeding edge.
>
> Enjoy the Sun!
>
> Phil Undercuffler
> Positive Energy
>
> "The most beautiful experience we can have is the mysterious....
> the fundamental emotion which stands at the cradle of true art
> and true science" --Albert Einstein
>
> ----- Original Message -----
> From: Travis Creswell, Ozark Solar <ozsolar at ipa.net>
> To: <RE-wrenches at topica.com>
> Sent: Wednesday, August 15, 2001 10:08 PM
> Subject: Re: Water pumping on grid tie [RE-wrenches]
>
> > Hello William,
> >
> > Due the typical utility rate structures (incredibly high kw demand in
> > relationship to the low kwh usage = very expensive commercial electricity)
> > that most electrical services dedicated commercial water pumps are on you
> > might be able to save them some money but it would be tricky. The best
> > thing you could do to save money is reduce the peak demand. A batteryless
> > system couldn't do that as the big pumps are probably already limited to
> > running at night to get into the cheaper off peak electricity. I am
> > familiar with analyzing commercial energy conservation projects for the
> best
> > possible pay backs and might be able to help you do a quick financial
> > analysis just to see if its even feasible. Let me know of I can be of any
> > help.
> >
> > Travis Creswell
> > Ozark Solar
> >
> > ----- Original Message -----
> > From: "William Miller" <wrmiller at slonet.org>
> > To: <RE-wrenches at topica.com>
> > Sent: Wednesday, August 15, 2001 4:37 PM
> > Subject: Water pumping on grid tie [RE-wrenches]
> >
> >
> > > Pals:
> > >
> > > Do any of you have any knowledge of anyone using grid tie systems to
> > offset
> > > energy costs for water pumping? Of particular usefulness would be any
> > > small water districts doing so. Thanks in advance.
> > >
> > > William Miller
> > >
> > > __________________________________________________________________
> >
> > - - - -
> > To send a message: RE-wrenches at topica.com
> >
> > Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
> >
> > List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
> >
> > Check out participant bios: www.mrsharkey.com/wrenches/index.html
> >
> > Hosted by Home Power magazine
> >
> > Moderator: michael.welch at homepower.com
> >
> >
> >
> >
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
More information about the RE-wrenches
mailing list