Two e-meters [RE-wrenches]

[Bob-O Schultze, Electron Connection]

<x-flowed>
John,
They will run off the same shunt just fine. You do need to have 
separate wires (five each) for each meter. Splicing in along the line 
somewhere will lead to inaccuracy.
Bob-O

>Hi folks,
>   I think this may have been covered before but at the time, I didn't pay
>much attention.  I have a new customer who will have a powershed between an
>existing small home and the new large house they are building.  They want to
>power both with a SW4024 system.  Currently they will be living in the small
>house and I want the e-meter to be there.  Can I hook up two shunts in series
>and have a meter in each building?  I know it will be a pain to wire the
>series shunts with the 4/0 cable but just wondering if it will work.
>
>John
>CVSolar

Bob-O Schultze, Electron Connection
PO Box 203, Hornbrook, CA 96044
800.945.7587 or 530.475.3402
fax 530-475-3401
www.electronconnection.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================



</x-flowed>