Two e-meters [RE-wrenches]

Daryl DeJoy penobscotsolar at panax.com
Mon Jul 30 03:39:08 PDT 2001


<x-flowed>
Hi John,
         I don't use the e-meter, only the TriMetric, but we have used two 
meters off the same shunt many times. I'm sure the e-meter would work the 
same way.
Daryl
Penobscot Solar Design



At 10:36 PM 7/29/01 -0400, you wrote:
>Hi folks,
>    I think this may have been covered before but at the time, I didn't pay
>much attention.  I have a new customer who will have a powershed between an
>existing small home and the new large house they are building.  They want to
>power both with a SW4024 system.  Currently they will be living in the small
>house and I want the e-meter to be there.  Can I hook up two shunts in series
>and have a meter in each building?  I know it will be a pain to wire the
>series shunts with the 4/0 cable but just wondering if it will work.
>
>John
>CVSolar
>
>- - - -
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
>List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
>Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
>Hosted by Home Power magazine
>
>Moderator: michael.welch at homepower.com
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================



</x-flowed>



More information about the RE-wrenches mailing list