SW error LED... [RE-wrenches]

[William Miller]

Carl:

This is where a good recording voltmeter pays for itself, such as a Fluke
87.  There is likely some parameter (frequency or voltage) on the edge of
acceptance.  The possibility is the parameter could stray further and cause
a problem of longer duration, usually when least convenient.

I also have a new Amprobe (Model number not readily available) that is
quite handy and does have recording function.

William


At 01:34 PM 7/7/01 +1200, you wrote:
>Hullo there...
>
>I was assisting a client with the procedure for charging from a generator and
>noticed the Error LED on the SW3048E intermittently flashing. The error
causes
>menu was not indicating a problem and the generator was not loosing sync.
>Charging was continuing as if nothing was amiss. This is an intermittent
>condition and I suspect it is of no consequence. My guess is that possibly an
>error condition (most likely under voltage) is being trapped but the
duration of
>the condition is too short to become a matter of consequence.
>
>Can someone confirm if I am on the right track ??
>
>Thanks,
>
>Carl Emerson


__________________________________________________________________
William Miller
SLO Communications: Communications and Power Systems Consulting
PO Box 50, Santa Margarita, CA 93453
Voice :805-438-5600		Fax: 805-438-4607	VMail: 805-546-4875
email: wrmiller at slonet.org
License No. C-10-773985
_____________________________________________________________
Compatibility:
Word processor: WP7
Spreadsheet: Quatro Pro 7
CAD: Microstation 95, DXF, Visio 4.1T
_____________________________________________________________
"I stand by all the misstatements that I've made." Dan Quayle
__________________________________________________________________

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================