SW error LED... [RE-wrenches]

[Gary Higbee, Solutions from the Land]

Regrading Carl's SW blinking red LED with a generator-based SW inverter:

Carl,

I've seen this, too, in a generator-based system I was working on in Hawaii.
I believe I looked at the error menu (seeing an occasional YES message for
frequency and voltage), and adjusted the generator (China diesel) voltage
regulator and RPM to eliminate or reduce the condition. When the LED was
blinking the SW never disconnected from the generator, but I felt that it
was important to reduce/eliminate the blinking, should things drift further.

Take care,

Gary

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     Gary Higbee  (ghigbee at efn.org)
          (541)607-1818 (Eugene)
         (541)902-8544 (Florence)
   Solar, wind, and hydro site analysis,
    design, and installation assistance
         ~Solutions from the Land~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================