net metered system question [RE-wrenches]

[Allan Sindelar, Positive Energy, Inc.]

Sparky,
Whoops! you're right. But I had to study the manual again before I would
admit it. I also plan to talk again with Trace tech support, as some of my
misunderstanding came from discussions with them re programming details.
Thanks for setting me straight.
Allan at PosE

----- Original Message -----
From: "R. Sparks Scott"
> If you are referring to menu item 17, "Set Battery Sell Volts DC", this
> makes no difference unless you are selling *battery* voltage, it will not
> affect a grid-tie system that is being fed from an outside charging source
> (PV's). It's set point only enters into inverter operation when the
> "inverting" LED is flashing, indicating battery selling.


- - - - - - -
To send a message:
 RE-wrenches at topica.com

The archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

List rules & etiquette:
 http://www.mrsharkey.com/wrenches/etiquete.htm

To unsubscribe send a message to: 
 RE-wrenches-unsubscribe at topica.com

To check out the other RE-Wrench participants:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine: 
 www.homepower.com

For info contact list moderator by email:
 michael.welch at homepower.com

____________________________________________________________
T O P I C A  -- Learn More. Surf Less. 
Newsletters, Tips and Discussions on Topics You Choose.
http://www.topica.com/partner/tag01