3 phase inverters [RE-wrenches]
Bill Brooks
billbrooks7 at earthlink.net
Fri Mar 2 16:57:31 PST 2001
Trace Engineering has the software to do it with three SW units. That would
seem to be expensive for this project. I'm not aware of any other options.
Bill.
> -----Original Message-----
> From: Todd Cory, Bald Mtn. Solar [mailto:toddcory at jps.net]
> Sent: Friday, March 02, 2001 4:22 PM
> To: RE-wrenches at topica.com
> Subject: RE: 3 phase inverters [RE-wrenches]
>
>
> Sorry Bill, you are right I neglected to mention that this will be used
> as a battery back up for a very critical water bypass valve at the hydro
> plant I work at part time.
>
> Last month when the plant went down, the Kohler genny did not start, so
> the valve could not open and the river was dry for about an hour... NOT
> GOOD and something that FERC SERIOUSLY frowns upon... so I am trying to
> come up with a proposal for a battery/inverter based feed system for
> this motor.
>
> Suggestions welcome... and I really don't want to try to swap out that
> motor to a non 3 phase one unless there is are other options. Everything
> at the plant is 3 phase 208.
>
> Isn't interesting how we test this generator every Monday and it never
> fails to fire right up.
>
> Todd
>
> - - - - - - -
> To send a message:
> RE-wrenches at topica.com
>
> The archive of previous messages:
> http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette:
> http://www.mrsharkey.com/wrenches/etiquete.htm
>
> To unsubscribe send a message to:
> RE-wrenches-unsubscribe at topica.com
>
> To check out the other RE-Wrench participants:
> www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine:
> www.homepower.com
>
> For info contact list moderator by email:
> michael.welch at homepower.com
>
> ____________________________________________________________
> T O P I C A -- Learn More. Surf Less.
> Newsletters, Tips and Discussions on Topics You Choose.
> http://www.topica.com/partner/tag01
>
>
- - - - - - -
To send a message:
RE-wrenches at topica.com
The archive of previous messages:
http://www.topica.com/lists/RE-wrenches/
List rules & etiquette:
http://www.mrsharkey.com/wrenches/etiquete.htm
To unsubscribe send a message to:
RE-wrenches-unsubscribe at topica.com
To check out the other RE-Wrench participants:
www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine:
www.homepower.com
For info contact list moderator by email:
michael.welch at homepower.com
____________________________________________________________
T O P I C A -- Learn More. Surf Less.
Newsletters, Tips and Discussions on Topics You Choose.
http://www.topica.com/partner/tag01
More information about the RE-wrenches
mailing list