OutBack Power and SB50s [RE-wrenches]

[Christopher Freitas - OutBack Power]

I got an email from Ian with a suggestion that sounded good enough that 
I had to pass it on.  

The RVPP SB50 can be mounted on the left side of a OutBack PSDC when 
only one SW inverter is used.  It can be mounted either above or below 
the inverter in the unused SW inverter space (the PSDC is designed to 
work as the DC disconnect AND as the conduit boxes for one or two SW 
series inverters).  There is even a knockout on the PSDC which lines up 
with the SB50's side knockouts, although it is a 3/4" and the SB50 is a 
1" size...  

This makes it easy to see the LED / display and to reach the equalize 
button.  This is the best option so far for a single SW / single SB50 
system so far.  

Thanks Ian!  

Christopher Freitas
OutBack Power Systems, Inc.
cfreitas at outbackpower.com  www.outbackpower.com
Tel 360 435 6030  Arlington WA USA

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================