SB304- SB50 limits [RE-wrenches]

[Bob-O Schultze, Electron Connection]

<x-flowed>
And Rick, since we seem to have you on the coals, please put the 1" 
instead of the 1/2" KOs closest to the back of the controller. Like 
it is, you either have to slug bust the controller or the Trace DC250 
to use a 1" offset nipple to merge the two. Pain in the butt.
bob-O


>Since the top and bottom K/O's are the same, perhaps the unit could be mounted
>upside down and the cover plate reversed. That would put the 
>heatsink on the right
>or the left to diversify the application. I have never tried this, 
>but it might be
>good to incorporate that into the design if it is not currently possible.
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================


</x-flowed>