SB304- SB50 limits [RE-wrenches]

[Todd Cory, Bald Mtn. Solar]

Since the top and bottom K/O's are the same, perhaps the unit could be mounted
upside down and the cover plate reversed. That would put the heatsink on the right
or the left to diversify the application. I have never tried this, but it might be
good to incorporate that into the design if it is not currently possible.

Todd


William Miller wrote:

> As I mentioned some time ago to Rick, I'd like to see the heat sink/chassis
> reversed so the SB50 could be mounted just to the right of a DC 250 or
> Outback equivalent.  This would be the obvious location.
>
> William

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================