SB304- SB50 limits [RE-wrenches]

William Miller wrmiller at slonet.org
Mon Nov 12 11:34:29 PST 2001


At 10:57 AM 11/12/01 -0800, you wrote:
>HI Rick,
>
>Also I would like to see the following.
>
>1. auto/manual EQ :  most people are just not going to remember to either
>turn in on or off.
>
>2. a better way to adjust the voltages.  In the job I did up in washington
>for the workshop (SEI) by the time we got the system up and running the
>clouds had come back and I didn't have enough power ( only .5 amps at 48v) to
>get the adapter you sent me to work, so I couldn't fine tune the voltages.
>
>3. love the box, large lugs,
>
>4. I also second the motion for a upgraded meter.  I have been pushing for
>years that all meters measure in watts ( like the trace C meter display) as
>this is the only measurement that people( customers) understand.  I could see
>adding the following.  1. watts 2. cumulative amp hours  ( makes a great help
>in diagnostics)
>

As I mentioned some time ago to Rick, I'd like to see the heat sink/chassis
reversed so the SB50 could be mounted just to the right of a DC 250 or
Outback equivalent.  This would be the obvious location.

William


__________________________________________________________________
William Miller
SLO Communications: Communications and Power Systems Consulting
PO Box 50, Santa Margarita, CA 93453
Voice :805-438-5600		Fax: 805-438-4607	VMail: 805-546-4875
email: wrmiller at slonet.org
License No. C-10-773985
_____________________________________________________________
Compatibility:
Word processor: WP7
Spreadsheet: Quatro Pro 7
CAD: Microstation 95, DXF, Visio 4.1T
_____________________________________________________________
"I stand by all the misstatements that I've made." Dan Quayle
__________________________________________________________________

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================





More information about the RE-wrenches mailing list