SW Efficiency/ PWM Angle Adjustment [RE-wrenches]
John Blittersdorf, Cent. VT Solar & Wind
cvsolar at aol.com
Thu Sep 6 19:38:17 PDT 2001
In a message dated 9/6/01 11:47:51 AM Eastern Daylight Time,
hugh.piggott at enterprise.net writes:
<< I paid about $700 for my power analyser clampmeter (works OK). But a
kWh meter is the bottom line. >>
Hugh, thanks for that thought. Now I have another reason to install a kWh
meter on the output of the SW4024 in all my grid tie systems. With the C40
DVM and the kWh meters near each other, it should be fairly easy to
determine the best set point.
John
CVSolar
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
More information about the RE-wrenches
mailing list