Diversion Load for wind generator [RE-wrenches]

[Windy Dankoff, Dankoff Solar]

<x-flowed>
>  >Darrin, just out of curiosity, are these standard 403s shredding
>themselves, or
>>the Industrial version with the extra ring of cooling fins and the
>(supposedly)
>>more robust controller?
>
>Doug,
>
>Both.  After adding the C40 and diversion load, I have had no failures
>reported from the field in the past 6 months.  I do not feel that the
>manufacturer is at fault for this failure since I seem to be using this unit
>outside it's design parameters.
>
>Darrin Primm

I don't see how running the unit for extended periods without 
significant load on the batteries is beyond the design parameters. 
That's a normal condition at times in real world.

I thought it's supposed to load itself and dissipate heat. -- Not 
enough, apparently.

Windy

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================

</x-flowed>