approved disconnects [RE-wrenches]
Michael Welch, Home Power
michael.welch at homepower.com
Wed Apr 4 14:50:43 PDT 2001
Bill Brooks wrote at 02:36 PM 4/4/2001:
>I don't believe all of PG&E requires it be lockable in the closed position.
>I just heard people talk about this recently. Personally, I think is wrong
>to make it lockable in the closed position. The reason I believe this is
>because depending on the location of our inverter, the utility disconnect
>can also double as the NEC service disconnect for the inverter. If you allow
>it to be lockable in the closed position, it can no longer perform that
>function and you have to mount two disconnects right next to each
>other--makes no sense. Locking in the closed position should be a customer
>decision.
Just to drag this on a little further, PG&E wanted some place to keep their lock even when they were not servicing the lines in that neighborhood.
Caveat: this situation was 23 months ago.
Michael Welch
------------------------
"Society is like a stew. If you don't keep it stirred up, you get a lot of scum on top."
Edward Abbey
Michael Welch, michael.welch at homepower.com www.homepower.com
Associate Editor, Home Power magazine
Office Coordinator, Redwood Alliance
(Not HP mag numbers) 707-822-7884 fax: 707-822-3481
- - -
To send a message:
RE-wrenches at topica.com
Archive of previous messages:
http://www.topica.com/lists/RE-wrenches/
List rules & etiquette:
http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios:
www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator:
michael.welch at homepower.com
==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com
T O P I C A -- Learn More. Surf Less.
Newsletters, Tips and Discussions on Topics You Choose.
http://www.topica.com/partner/tag01
==^================================================================
More information about the RE-wrenches
mailing list