approved disconnects [RE-wrenches]

[Michael Welch, Home Power]

Bill Brooks wrote at 02:00 PM 4/4/2001 -0400:
  
>This is usually interpreted as a "utility-accessible, visible-open,
>gang-operated switch, lockable in the open position with a 3/8" utility
>lock."

PG&E also requires lockable in the closed position. The approved unit we installed did not have a hole for a lock in the closed position, but did have a little punch mark where we could drill a hole.
  
Michael Welch
  
------------------------
"Society is like a stew. If you don't keep it stirred up, you get a lot of scum on top."
			Edward Abbey
        
Michael Welch, michael.welch at homepower.com www.homepower.com
     Associate Editor, Home Power magazine
     Office Coordinator, Redwood Alliance
     (Not HP mag numbers) 707-822-7884 fax: 707-822-3481

- - -
To send a message:
 RE-wrenches at topica.com

Archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

List rules & etiquette:
 http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator:
 michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A  -- Learn More. Surf Less.
Newsletters, Tips and Discussions on Topics You Choose.
http://www.topica.com/partner/tag01
==^================================================================