SB304- SB50 limits [RE-wrenches]
Lawrence Elliott
larry at energyoutfitters.com
Sat Nov 10 08:03:51 PST 2001
Lee. Yes I have run into the same problem. I like the RV allot and have
been using them almost exclusively on larger systems but they are badly
limited.
I use allot of SR100's and a twelve panel array is common. On a long run
using the 3048 it's useless since even this array is limited by the 3048
to less current than can be produced at 24. I have a system going in
that is 48 with two 12 panel SR100 and I will need to run two RV's at
slightly over half current since putting both arrays into one controller
exceeds the current just a little. Adds more cost to a system that could
be simplified.
Rick had better take the hint and get on the stick. The industry needs
something better. Hint! Hint!
Larry Elliott
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
More information about the RE-wrenches
mailing list