SB304- SB50 limits [RE-wrenches]

Todd Cory, Bald Mtn. Solar toddcory at jps.net
Sat Nov 10 10:12:31 PST 2001


I agree, 30 amps at 24 volts is pretty useless as the capacity is just
sufficient. I wonder why this controller is not built at the 50 amp capacity
like the 5024?

Is Rick on the list? Maybe he would like to explain?

Todd


Lawrence Elliott wrote:

> Lee. Yes I have run into the same problem. I like the RV allot and have
> been using them almost exclusively on larger systems but they are badly
> limited.
> I use allot of SR100's and a twelve panel array is common. On a long run
> using the 3048 it's useless since even this array is limited by the 3048
> to less current than can be produced at 24. I have a system going in
> that is 48 with two 12 panel SR100 and I will need to run two RV's at
> slightly over half current since putting both arrays into one controller
> exceeds the current just a little. Adds more cost to a system that could
> be simplified.
> Rick had better take the hint and get on the stick. The industry needs
> something better. Hint! Hint!
> Larry Elliott

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================





More information about the RE-wrenches mailing list