GFI isolated neutral [RE-wrenches]

[Jeffrey Wolfe, Global Resources]

Well, I've done isolated neutrals before for Trace GFI's with a DC250 box, 
and I haven't really liked the looks of the finished products. What is 
anyone using for the isolated neutral bar in the DC250? All I need is a 
decent looking bar that can be bolted onto the shunt block. Of course, this 
would probably make me move the shunt block, which is a pain on a power 
panel. So a better solution is a truly isolated bus bar that can be screwed 
to the DC250 backplate.

Any great suggestions (That I can buy from a respectable electrical supply 
house)?

Jeff

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================