stoves [RE-wrenches]

[blair Tump may]

<x-flowed>
Stoves w/out pilots use ignitor bars, also used in propane dryers, these 
ignitor bars consume @ 600 watts heating the thermo coupler, once the gas 
valve opens then they (ignitor bar) shut off until the thermostat requires 
more heat. If you have a good tech usually 1 can re configure the stoves to 
a standing pilots.Pricey tho because U need to change the oven controller 
and install a thermo coupler but the retro kits can be configured We just 
size the BB a bit larger but its not a really big thing until  Christmas 
dinner and you have the oven on for 6-7 hrs snowed for the past week, 
lights on and the back up generator is in the shop......cold raw turkey ummmm



Solarwinds NorthernLights
Serving Mid Coast Maine & Northern California
          610-517-8401              707-498-2804








- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A  -- Learn More. Surf Less.
Newsletters, Tips and Discussions on Topics You Choose.
http://www.topica.com/partner/tag01
==^================================================================

</x-flowed>