[RE-wrenches] Cable Ties

[Allan Sindelar]

Michael, I have had no known failures with Hellerman-Tyton’s line, which is quite extensive. 
Allan

> On Mar 13, 2022, at 4:12 PM, Michael Morningstar <mjmorningstar at gmail.com> wrote:
> 
> 
> Wrenches,
> Who makes the best cable ties, and which part number for under PV wire management? I keep going back to past projects where I used quality high-heat resistant UV rated Panduit and Burndy ties that became brittle.
> Thanks,
> Michael
> 
> -- 
> Michael Morningstar
> 
> Morningstar Electric
> PO Box 1494
> Mount Shasta, CA 96067
> 530-921-0560
> mjmorningstar at gmail.com
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20220313/6fe2852d/attachment.htm>