[RE-wrenches] Mate3s hangups

[Dan Fink]

Chris; An inexpensive Klein LAN cable tester became a standard part of my
tool kit when the Mate3 and other monitoring systems came out. I now test
all Cat6 cables from all manufacturers before installing them, even if they
are new in the sealed bag. I've often ended up as a home networking IT
consultant for my solar energy customers, just to get their PV system
monitoring up and running!

https://www.amazon.com/gp/product/B085LPN71C/

Dan Fink
Owner, Buckville Energy Consulting LLC
IREC Certified Instructor for PV and Small Wind Installation
NABCEP Certified PV System Inspector
NABCEP PV Associate
d <dan.fink at greendustrialtraining.com>anbob88 at gmail.com
970-672-4342

On Fri, Feb 18, 2022 at 6:35 AM Christopher Warfel <
cwarfel at entech-engineering.com> wrote:

> Hi, This system is not tied into Optics. Merchant Marine retiree and he
> did not see the value in that. If it ran on steam, he might have gone for
> it.
>
> I will check the hub. It is the original hub (11 years old).  I have a
> system of the same vintage (w/r to Hub) and it is displaying correctly.
> I'll bring a bunch of spare cables and see if that is the issue.  Thank
> you, Chris
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20220218/b6b7d670/attachment.htm>