[RE-wrenches] Radian Glitch

[William Miller]

Mac:

Have you rebooted the Mate since this problem began?  Had the exact same problem and this fixed it. 

If rebooting does not resolve it you might try resetting to factory defaults. 

William Miller
www.millersolar.com

> On Jan 13, 2022, at 4:38 AM, Mac Lewis <maclewis1 at gmail.com> wrote:
> 
> 
> Good Morning Wrenches,
> 
> I have an Outback Radian 8048 site that is acting up.  
> 
> This only happens when the generator is automatically started.
> It will start the generator and warm it up normally and then connect and start charging as it should.  After about 30 seconds to 1 minute it will drop the AC input, and put the generator in cool down mode and the charger will be disabled.  It will then continue to run the generator until you turn it off manually, presumably because it hasn't reached the stop trigger.  
> 
> This system will charge normally when the generator is manually started.  The firmware on the Mate3s is up to date.
> 
> Any ideas?
> 
> Thanks in advance
> 
> -- 
> 
> 
> 
> Mac Lewis
> 
> "Yo solo sé que no sé nada." -Sócrates
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20220113/81b755a8/attachment.htm>