[RE-wrenches] Radian Glitch

[Mac Lewis]

Good Morning Wrenches,

I have an Outback Radian 8048 site that is acting up.

This only happens when the generator is automatically started.
It will start the generator and warm it up normally and then connect and
start charging as it should.  After about 30 seconds to 1 minute it will
drop the AC input, and put the generator in cool down mode and the charger
will be disabled.  It will then continue to run the generator until you
turn it off manually, presumably because it hasn't reached the stop
trigger.

This system will charge normally when the generator is manually started.
The firmware on the Mate3s is up to date.

Any ideas?

Thanks in advance

-- 



Mac Lewis

*"Yo solo sé que no sé nada." -Sócrates*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20220113/bb502f8f/attachment.htm>