[RE-wrenches] PAE series surge capacity/ power factor ?

[Jeremy Rodriguez]

Hello
we have a lot of PAE series magnum inverters out there.
One client lately has been experiencing voltage drop and failure of PCBs in two of his household appliances.  I know it’s common to have some dimming of the lights when a well pump or other large load kicks on, but has anyone ran across a solution to alleviate the problem or boost up the voltage / condition it, in any way ?
I’m not sure if this just happens with low battery voltage, or always
The inverter is located ~ 300 ft from the main electrical panel with #2/2/2/4 URD feeders to an outdoor disco, then 8 AWG copper to the mains panel.
4448 PAE with one string of 6CS21P Batteries.


Jeremy Rodriguez
Solar Installation / Design Expert
All Solar, Inc.
1453 M St
Penrose Colorado


Sent by Jeremy's iPhone. Sorry for typos and shorthand!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20220109/8cbc15ce/attachment.htm>