[RE-wrenches] Outback MX-60

[frenergy]

boB,

             Interesting...Sounds like this is not a candidate for L-ion 
batteries.

Bill

On 11/30/2021 10:47 PM, bob at midnitesolar.com wrote:
>
> Hi Bill....
>
> As I remember, the min is of course... Minimum time in Absorb.
>
> Max is maximum time in absorb but depended on how long it took to get 
> from Bulk MPPT to that Absorb voltage.
>
> So if it took 3 hours to get to Absorb that morning and you had t set 
> for Max 2 hours,  it would Absorb for 2 hours.
>
> If it only took 1 and 1/2 hours to reach Absorb voltage, the MX60 
> would Absorb for 1 and 1/2 hours.
>
> It worked "OK"  but these days I would probably just set it for min of 
> some 2 or 3 hours and then a max could be the same
> time or longer for FLA batteries.
>
> boB
>
>
>
> On 11/30/2021 7:16 PM, frenergy wrote:
>>
>> Yes, the old one, not the FM.  This oldie had an interesting way to 
>> set the absorption time. You would set the "min" time (in minutes) 
>> and you would set the "max" time (in hours, you have to set it to 
>> 1,2,3 or 4 hours).
>>
>>             I need to know if I set the "min" to 10 minutes and the 
>> "max" time to one hour or two or three or four, how long will it stay 
>> in absorb?
>>
>>             I called Outback and Megan there didn't know how this old 
>> fart works, apparently tech support isn't supporting us their old relics.
>>
>> Bill
>>
>> Feather River Solar Electric
>> Bill Battagin, Owner
>> 4291 Nelson St.
>> Taylorsville, CA 95983
>> 530.284.7849
>> CA Lic 874049
>> solar powered since 1982
>>
>>


-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20211201/00c95c0d/attachment.htm>