[RE-wrenches] Outback MX-60

[bob at midnitesolar.com]

Hi Bill....

As I remember, the min is of course... Minimum time in Absorb.

Max is maximum time in absorb but depended on how long it took to get 
from Bulk MPPT to that Absorb voltage.

So if it took 3 hours to get to Absorb that morning and you had t set 
for Max 2 hours,  it would Absorb for 2 hours.

If it only took 1 and 1/2 hours to reach Absorb voltage, the MX60 would 
Absorb for 1 and 1/2 hours.

It worked "OK"  but these days I would probably just set it for min of 
some 2 or 3 hours and then a max could be the same
time or longer for FLA batteries.

boB



On 11/30/2021 7:16 PM, frenergy wrote:
>
> Yes, the old one, not the FM.  This oldie had an interesting way to 
> set the absorption time. You would set the "min" time (in minutes) and 
> you would set the "max" time (in hours, you have to set it to 1,2,3 or 
> 4 hours).
>
>             I need to know if I set the "min" to 10 minutes and the 
> "max" time to one hour or two or three or four, how long will it stay 
> in absorb?
>
>             I called Outback and Megan there didn't know how this old 
> fart works, apparently tech support isn't supporting us their old relics.
>
> Bill
>
> Feather River Solar Electric
> Bill Battagin, Owner
> 4291 Nelson St.
> Taylorsville, CA 95983
> 530.284.7849
> CA Lic 874049
> solar powered since 1982
>
>
> On 11/28/2021 6:16 PM, William Miller wrote:
>> Jay:
>>
>> https://millersolar.com/MillerSolar/case_studies/28_UtilityRates/UtilityRates.html
>>
>> Hope this helps.
>>
>> William MIller
>>
>> Miller Solar
>> 17395 Oak Road, Atascadero, CA 93422
>> 805-438-5600
>> www.millersolar.com
>> CA Lic. 773985
>>
>>
>> -----Original Message-----
>> From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On
>> Behalf Of Jay
>> Sent: Friday, November 26, 2021 7:13 PM
>> To: RE-wrenches
>> Subject: [RE-wrenches] PG&E solar rates
>>
>> I’m wondering if anyone  has or can tell me where to find the new PG&E solar
>> rates for 2022 and or what they are now.
>>
>> It looks like all PG&E residential customers are now on TOU or as of 2022
>> anyway.
>>
>> Thanks
>>
>> Jay
>> Peltz power
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> Pay optional member dues here:http://re-wrenches.org
>>
>> List Address:RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> There are two list archives for searching. When one doesn't work, try the
>> other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> Pay optional member dues here:http://re-wrenches.org
>>
>> List Address:RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> There are two list archives for searching. When one doesn't work, try the other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>>
> -- 
>
> www.frenergy.net
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon> 
> 	Virus-free. www.avast.com 
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link> 
>
>
> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here:http://re-wrenches.org
>
> List Address:RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20211130/9d7b15b4/attachment.htm>